2 how to supply grease on slider type – IAI America ERC3 User Manual
Page 388
Advertising
Chapter 8
Actuator Maintenance Check
8.6 Grease Supply
378
8.6.2 How to Supply Grease on Slider Type
1) Remove the thin-head screws with a 1.5mm hex wrench for SA5 and 2.0mm wrench for SA7.
2) Detach the screw cover.
3) After cleaning up the guide on both sides, apply the grease. Slide the slider back and forth to
evenly apply the grease. Wipe off the excess grease at last.
Thin-Head Screw
Screw Cover
Guide
Guide
Advertising