IAI America ERC3 - Manual (Page 93)

Chapter 2 Installation
2.3 How to Install
83
Caution:
• When installing on the flange, do not apply external force to the unit. It may cause an operation
error or damage with the external force.
• Even if external force is not applied, when the length of the unit is 386mm or more and the
actuator is installed horizontally, apply a support as shown in the figure below. Even the unit
length 386mm or less, vibration may get generated in some operation conditions or installation
environment, and may result in an operation error or damage. Have an appropriate support in
such cases.
ٳщ
ૅਤӨ
External
Force
External
Force
Support
Block