Comtech EF Data CDM-570A - Manual (Page 115)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Front Panel Operation Revision 2
6–11
(CONFIG: Remote Control) Ethernet: SNMP
SNMP: Communities Traps
(◄ ►, ENT)
Use the ◄ ► arrow keys to select a parameter. Press ENTER.
(CONFIG: Remote Control) Ethernet: SNMP  Communities
SNMP Communities:
Read Write (◄ ►, ENT)
Use the ◄ ► arrow keys to select a parameter. Press ENTER.
(CONFIG: Remote Control) Ethernet: SNMP  Communities
 Read
Read Community: (◄ ►,▲ ▼)
public
(CONFIG: Remote Control) Ethernet: SNMP  Communities
 Write
Write Community: (◄ ►,▲ ▼)
private
To edit the SNMP Read or Write Community strings, use the ◄ ► arrow keys to select
a character to edit. Then, use the ▲▼arrow keys to edit that character. Note that
only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash ‘/’
(ASCII code 92) and tilde ‘~’ (ASCII code 126).
Press ENTER once you compose the string – the modem removes all trailing spaces
from the string upon entry.
(CONFIG: Remote Control) Ethernet: SNMP  Traps
Traps: Community Version
IP Addr#1 IP Addr#2 (◄ ►)
Use the ◄ ► arrow keys to select a parameter. Press ENTER.
(CONFIG: Remote Control) Ethernet: SNMP  Traps 
Community
Trap Community: (◄ ►,▲ ▼)
comtech