Comtech EF Data CDM-570A - Manual (Page 478)

CDM-570L/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Appendix D Revision 2
D–20
D.1.3.3 SNMP Interface
Sect. 7.2 SNMP Interface (Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
The Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices on IP networks. An SNMP-managed network consists of three key
components:
• The managed device – This includes the CDM-570A/570AL-IP.
• The SNMP Agent – The software that runs on the CDM-570A/570AL. The CDM-570A/570AL-
IP SNMP Agent supports both SNMPv1 and SNMPv2c.
• The user-supplied Network Management System (NMS) – The software that runs on the
manager.
D.1.3.4 Telnet Interface
• Sect. 7.3 Telnet Interface (Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
• Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
• Chapter 9. OPTIONAL PACKET PROCESSOR – SERIAL/TELNET CLI OPERATION
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either remote control commands and queries or, when equipped with the optional
Packet Processor, the Telnet Command Line Interface (CLI) (Figure D-1).
Figure D-1. CDM-570A/570AL-IP Telnet Interfaces (Serial Remote / CLI)