Comtech EF Data CDM-570A - Manual (Page 274)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Serial-based Remote Product Management Revision 2
8–34
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Demo Mode DMM= 1 byte, value of 0
thru 2
Command or Query.
Demo Mode Enable/Disable in the form of x, where:
0 = Disabled
1 = Enabled
2 = Expired
Note: Changing value from 0 to 1, or 1 to 0, causes the modem to turn off
carrier output and reboot.
DMM=
DMM?
DMM*
DMM#
DMM? DMM=x
(see Description of
Arguments)