4 admin | pap features – Comtech EF Data CDM-570A User Manual

Page 187

Advertising
background image

CDM-570A/570AL Satellite Modem with Optional Packet Processor

MN-CDM570A

Ethernet-based Remote Product Management

Revision 2

7–19

7.4.3.2.4

Admin | PaP Features

1)

This page is available only when you install the optional Packet Processor.

2)

If you submit any changes to this page, you must also open the ‘Admin | Pap

Save’ page (see Chapter Sect. 7.4.3.2.7) and immediately click [Save PaP

Parameters].

-

Figure 7-6. Admin | PaP Features Page

Features – Standard

Use the drop-down lists to set operation as Enabled or Disabled:

•

Telnet

•

Ping Reply

•

Managed Switch Multicast Option

•

LAN-to-LAN Routing

•

L2 Tx Header Compression

•

L2 Rx Header Compression

•

Downlink Route All Available Multicast

Click [Submit] to save.

Features – Optional

•

Chapter 5. FAST ACTIVATION PROCEDURE

•

Sect. 7.3 Admin | FAST Page

When an optional FAST feature is not available, its associated drop-down list appears

dimmed and is non-selectable.

Use the drop-down lists to set operation as Enabled or Disabled:

•

IGMP

•

L3/L4/L5 Rx Header Compression

•

Vipersat Management

•

Vipersat STDMA

•

Vipersat File Streamer

•

Vipersat Auto Switching

•

VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)

•

Vipersat CDM-570/570L Satellite Network Modem User Guide (CEFD P/N

MN/22125)

Advertising
This manual is related to the following products: