Q.3.2 managed switch mode – local & remote mode – Comtech EF Data CDM-570A User Manual

Page 610

Advertising
background image

CDM-570A/570A Satellite Modem with Optional Packet Processor

MN-CDM570A

Appendix Q

Revision 2

Q–6

Q.3.2

Managed Switch Mode – Local & Remote Mode

Figure Q-6. CDM-570A/570AL Operation – Local & Remote Mode

In Local & Remote Mode, you can access M&C for both the local and distant-end modems.

As shown in Figure Q-6, Local & Remote Mode:

Allows modem access through the ‘10/100 Ethernet | M&C 100’ (Dedicated Management) port for

both the local and distant-end modems:

o 1a. The ‘10/100 Ethernet | M&C 100’ (Dedicated Management) port permits User PC M&C

access to the local modem.

o 1b. The local modem accepts M&C communication from the User PC and responds accordingly.

o 2a. Packets destined to the distant-end modem from the local modem will be transmitted.

o 2b. M&C requests transmitted by the distant-end modem to the local modem will be forwarded

back to the local User PC.

o 3a. Packets received by the distant-end modem for M&C access from the local modem will be

accepted.

o 3b. The local modem will transmit a response to the distant-end modem.

Does not allow M&C access to the local or distant-end modem through the ‘10/100 Ethernet |

Traffic 100’ Ethernet port.

Advertising
This manual is related to the following products: