Q.3.1 managed switch mode – local only mode – Comtech EF Data CDM-570A User Manual

Page 609

Advertising
background image

CDM-570A/570A Satellite Modem with Optional Packet Processor

MN-CDM570A

Appendix Q

Revision 2

Q–5

Q.3.1

Managed Switch Mode – Local ONLY Mode

Figure Q-5. CDM-570A/570AL Operation – Local ONLY Mode

Local ONLY Mode limits modem M&C access only through the ‘10/100 Ethernet | M&C 100’ (Dedicated

Management) port. It will not allow modem M&C access over the WAN interface (i.e., the ‘10/100

Ethernet | Traffic 100’ port).

As shown in Figure Q-5, Local ONLY Mode:

Allows local modem M&C access only through the local modem’s ‘10/100 Ethernet | M&C 100’

(Dedicated Management) port:

o 1a. Dedicated Management permits User PC M&C access to the local modem ‘10/100 Ethernet |

M&C 100’ port.

o 1b. The local modem accepts M&C communication from the User PC and responds accordingly.

Does not allow M&C access to the local modem through the ‘10/100 Ethernet | Traffic 100’ port.

Does not allow M&C access to the distant-end modem over the WAN:

o 2. Packets transmitted via Dedicated Management Port to the distant-end modem will be

dropped by the local modem.

Does not allow M&C access to the local modem from the distant-end modem, whether or not either

modem is in Dedicated Management mode:

o 3. Packets received, by the local modem (intended for local modem M&C access), from the

distant-end modem will be dropped.

Advertising
This manual is related to the following products: