1 select: (main) menu, 2 (select:) odu – Comtech EF Data CDM-570A User Manual

Page 380

Advertising
background image

CDM-570A/570AL Satellite Modem with Optional Packet Processor

MN-CDM570A

CDM-570A/570AL ODU (Transceiver, BUC, LNB) Operation

Revision 2

10–6

10.2.1.1 SELECT: (Main) Menu

SELECT: Config Test Info

Monitor Save/Ld Util ODU

The table that follows identifies the commands comprising the CDM-570A main menu, and the

content section in this manual where explicit information may be referenced, either in this

chapter or in Chapter 6. FRONT PANEL OPERATION:

Menu Branch

Chapter Sect.

Description

Config

6.3.2

Use this menu branch to fully configure the modem.

Monitor

6.3.3

Use this menu branch to monitor the alarm status of the modem, to

view the log of stored events, and to display the Receive

Parameters screen.

Test

6.3.4

Use this menu branch to invoke one of several test modes

(loopbacks, for example).

Info

6.3.5

(Information) Use this menu branch to view information on the

modem, without having to go into configuration screens.

Save/Ld

6.3.6

Use this menu branch to save (store) and to load (retrieve) up to 10

different modem configurations.

Util

6.3.7

(Utility) Use this menu branch to perform miscellaneous functions,

such as setting the real-time clock, adjusting the display brightness,

etc.

ODU

10.2.1.2

10.2.1.3.1 (CSAT)

10.2.1.2.2 (KST)

(Outdoor Unit) Use this CDM-570A menu branch to monitor and

control a Comtech EF Data RF Transceiver (CSAT-5060 or

KST-2000A/B), if connected.

For ODU operation, use the

◄ ► arrow keys to select ODU, and then press ENTER.

10.2.1.2 (SELECT:) ODU

Transceiver Control:

Disable Enable (◄ ►,ENT)

Use the

◄ ► arrow keys to select Disable or Enable, and then press ENTER. Note the following:

Disable

This menu item turns OFF the FSK link to the ODU

Enable

This menu item turns ON the FSK link to the ODU.

The message “ATTEMPTING COMMUNICATION WITH ODU... PLEASE WAIT” displays while

the the CDM-570A senses and connects with the active ODU model. If no ODU is present, the

process aborts and the modem returns to the SELECT: ODU menu screen.

Otherwise, once a CSAT-5060 or KST2000A/B Transceiver successfully connects with the

modem via the FSK link, sections 10.2.1.3.1 and 10.2.1.2.2

in this chapter address the pertinent

front panel operation functionality. See Figure 10-3 and Figure 10-4 for the ODU-specific

CDM-570A menu tree diagrams.

Advertising
This manual is related to the following products: