Comtech EF Data CDM-570A - Manual (Page 47)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Introduction Revision 2
1–13
Option Description and Comments Install Method
Optimized Transmit Filter Rolloff
(5%, 10%, 15%, 20%, 25%)
Up to 512 kbps for CCM FAST
Up to 1.1 Mbps for CCM FAST
Up to 2.5 Mbps for CCM FAST
Up to 5 Mbps for CCM FAST
Up to 10.239 Mbps for CCM FAST
Primary Input Power Supplies
(without BUC P/S)
100 to 240V AC HW
-24V DC HW
-48V DC HW
Primary Input Power Supplies
(with BUC P/S)
100 to 240V AC w/24V DC 90W @50°C BUC P/S HW
100 to 240V AC w/48V DC 150W @50°C BUC P/S HW
-24V DC w/24V DC 90W @50°C BUC P/S HW
-48V DC w/24V DC 90W @50°C BUC P/S HW
-48V DC w/48V DC 150W @50°C BUC P/S HW
1.2.10 Supporting Hardware and Software
1.2.10.1 CDM-570AL/CDMR-570AL L-Band Redundancy
For 1:1 applications, the modem is supported by the low-cost external CRS-170A L-Band 1:1
Redundancy Switch.
For Hub applications, the modem is supported by the low-cost external CRS-300 1:N
Redundancy Switch coupled with the CRS-280L (L-Band) Redundancy Switch.
1.2.10.2 CDM-570A 70/140 MHz Redundancy
For 1:1 applications, the modem is supported by the low-cost external CRS-180 70/140MHz 1:1
Redundancy Switch.
For Hub applications, the modem is supported by the low-cost external CRS-300 1:N
Redundancy Switch coupled with the CRS-280 IF (70/140 MHz) Switch.
1.2.10.3 Support Software
The modem is supported by Comtech EF Data’s SatMac (Satellite system Monitor and Control)
Version 4.7 software, a Windows TM -based application that provides a ‘point and click’ interface
for the complete system of Comtech EF Data equipment (comprising Modems, Transceivers, and
Redundancy Switches).
Contact Comtech EF Data Product Support for more information or to order a free demo disk.
SatMac is also available for download from the M&C Utilities link on Comtech EF Data’s website.