B.6.1 versafec extensions, B.6.1.1 extended ccm codes – Comtech EF Data CDM-570A User Manual

Page 436

Advertising
background image

CDM-570A/570AL Satellite Modem with Optional Packet Processor

MN-CDM570A

Appendix B

Revision 2

B–8

As a comparison, looking at LDPC Rate 2/3 8-QAM and VersaFEC Rate 0.642 8-QAM essentially

identical spectral efficiency and Eb/No performance. However, at 64 kbps, the latency has been

reduced from 350 milliseconds to 89 milliseconds – a factor of 4 reduction.

The performance of the VersaFEC codes compared with the Shannon bound is shown in Figure B-1.

This puts the performance of VersaFEC at or near the DVB-S2 performance with 16 kbit blocks.

Figure B-1. VersaFEC Codes versus Shannon Capacity

Note that SNR is defined as Eb/No + 10

log

(Spectral Efficiency).

B.6.1 VersaFEC Extensions

B.6.1.1

Extended CCM Codes

Two additional rates are available with the VersaFEC family of codes. Note that these are CCM

(Constant Coding and Modulation) only – they are NOT included in the ACM set of ModCods.

These two codes (see Table B-4) have been added to fill in perceived gaps in the progression of

spectral efficiency versus SNR. They do not, in fact, provide any discernible improvement in

Eb/No performance (compared with their nearest neighbors in the initial VersaFEC family), but

exhibit a modest SNR improvement.

Table B-4. Extended CCM Codes

Modulation

Code

Rate

Spectral efficiency,

bps/Hz

Typical

Eb/No, for

BER = 5 x 10

-8

Latency at

64 kbps, in

milliseconds

Min. Data Rate,

CCM Mode (kbps)

Max. Data Rate, CCM

Mode (Mbps)

8-QAM

0.576

1.73

4.5 dB

87

8.3

5.179

16-QAM

0.644

2.58

6.5 dB

121

12.4

7.726

Advertising
This manual is related to the following products: