Comtech EF Data CDM-570A - Manual (Page 334)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–38
9.3.7 Vipersat Configuration
VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
This page displays only if the optional Vipersat feature is enabled.
Open the Vipersat Configuration page from the Main Menu.
Figure 9-24. Vipersat Configuration
Selection Hot Key Description
STDMA Mode T Used only when CDM-570A/570AL is used in a Vipersat
Management System (VMS).
See the VMS v3.x.x VIPERSAT Management System User Guide
(CEFD P/N MN/22156)for complete information.
Automatic Switching A
Unit Role R
Expansion Unit E
Bandwidth Group ID B
Unit Name N
Multicast Management IP
Address
M
Multicast VMS Management IP
Address
V
Managing IP Address I
Path Loss Data Multicast
(PLDM)
P
Dynamic Power Control Config C
Set Home State Parameters H