Comtech EF Data CDM-570A - Manual (Page 587)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Appendix N Revision 2
N–9
1:1 Redundancy (Auto Detected)
Redundancy: PARAM File Connection Established.
Redundancy: Sending PARAM File...
• Offline modem will display:
1:1 Redundancy (Auto Detected)
Redundancy: Received PARAM File...
Writing 5447 bytes to PARAM file on Flash
7. On the Online modem, select the Redundancy Configuration menu [R] from the CLI Main
Menu. Observe that the correct IP Addresses/Masks are displayed for the Local and
Redundant Units.
You must then set the Traffic IP Address/Mask (this also needs to be in the same subnet as
the Management IP addresses):
All configuration changes can only be made to the Online
CDM-570A/570AL-IP and require that you “Save Parameters to permanent
storage [S]” so that the configuration change is also applied to the Backup
CDM-570A/570AL.