Comtech EF Data CDM-570A - Manual (Page 70)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Rear Panel Connectors and Pinouts Revision 2
3–8
3.2.2.2 10/100 Ethernet | Traffic 100 Port, RJ-45 (w/Optional Packet
Processor only)
This 8-pin RJ-45 modular port is present only if the optional High-Performance
Packet Processor is installed. Use a CAT5 cable to connect this port to an
Ethernet hub, router, switch, PC, etc. for Ethernet data traffic, M&C of base
modem and Packet Processor functions via Telnet/HTTP/ SNMP, and to
update the Packet Processor firmware.
Table 3-3. Typical Ethernet Port Pin Assignments
Pin # Function
1 Tx+
2 Tx-
3 Rx+
4 N/C
5 N/C
6 Rx-
7 N/C
8 N/C