Comtech EF Data CDM-570A User Manual

Page 290

Advertising
background image

CDM-570A/570AL Satellite Modem with Optional Packet Processor

MN-CDM570A

Serial-based Remote Product Management

Revision 2

8–50

Parameter

Type

Command

(Instruction

Code and

Qualifier)

Arguments for

Command or

Response to

Query

Description of Arguments

Response to

Command

Query

(Instruction Code

and Qualifier)

Response to

Query

CnC-APC State

(continued)

18 = Distant End NoResponse

19 = Fail-Calculate Mismatch

20 = CnC Ratio too high

21 = Please run again

22 = APC is active

23 = Local margin too low

24 = Distant margin too low

25 = Rx Data Rate<64kbps

26 = Tx Data Rate<64kbps

27 = Local RSL too low

28 = Distant RSL too low

CnC-APC Max

Power Level

Increase

APL=

3 bytes

Command or Query.

Valid only in CDM-570A Compatible Mode (CMO=1).

Sets or returns CnC-APC maximum power level increase, limited by Tx power

level, in the form xx.x, where:

xx.x = value from 0.0 to 9.9 dB,.

Example: <0/APL=3.9 (APC max power level increase is 3.9 dB.)).

APL=

APL?

APL*

APL#

APL?

APL=xx.x

(see Description of

Arguments)

CnC-APC

Home State

AHS=

12 bytes

Command or Query.

Valid only in CDM-570A Compatible Mode (CMO=1).

Note: Command is only for Offline unit, sent by switch in a 1:N Redundancy

system, or Online unit in a 1:1 Redundancy system.

Returns CnC-APC home state parameters in the form a,bbb,cc,ddd, where:

a = APC state. (1 = APC is active, 0 = APC is not active)

bbb = APC home state Tx power, in 0.1dB. (minus sign assumed)

cc = APC home state max power level increase, in 0.1 dB.

ddd = APC Tx power threshold, in 0.1 dB. (minus sign assumed)

Example: <0/AHS=1,100,60,085 (APC is active, home state power is -10.0 dB,

home state max power level increase is 6.0 dB, power threshold is -8.5 dB)

AHS=

AHS?

AHS*

AHS#

AHS?

AHS=a,bbb,cc,ddd

(see Description of

Arguments)

ACM Remote

Signal Noise Ratio

N/A

4 bytes

Query only.

Returns the value of SNR of the remote demod in the form xx.x, where:

99.9 = Demod is unlocked.

xx.x = Not in IP-ACM.

Example: <0/RSN?

>0/RSN=12.4

N/A

RSN?

RSN=xx.x

(see Description of

Arguments)

Advertising
This manual is related to the following products: