Comtech EF Data CDM-570A - Manual (Page 237)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Ethernet-based Remote Product Management Revision 2
7–69
7.4.3.4.6.2 Status | Graph | Spectrum
(TOP) Page Example where “PICK A COLOR” = (RED), AVERAGING=High, RESOLUTION=High,
BAND=Narrow
(BOTTOM) Page Example where “PICK A COLOR” = (GREEN), AVERAGING=Low, RESOLUTION=High,
BAND=Wide (Banner, Menu Bar not shown)
Figure 7-41. Status | Graphs | Spectrum Page
Use this page to display the real-time Spectrum Analyzer. Customize the display as follows:
Feature Description Setting
“PICK A COLOR” Click RED or GREEN to define the
overall appearance of the graph.
• RED waveform on a BLACK/GRAY grid
• GREEN waveform on a GRAY/BLUE grid
AVERAGING Allows you to select the averaging of the
FFT spectrum.
Select Off, Low, Medium, or High
RESOLUTION Allows you to adjust the output
resolution.
Select Low, Medium, or High
BAND Allows you to select the bandwidth span. Select Narrow or Wide
Click [START] to activate or [STOP] to pause the Spectrum Analyzer function.