Application category reports – H3C Technologies H3C Intelligent Management Center User Manual
Page 153
143
Figure 72 Protocol Report: Protocol Traffic Trend for an Individual Protocol
TopN protocol usage list for an individual protocol
The TopN Protocol Usage List includes the source host list and destination host list for an individual
protocol for all VLANs in the selected traffic analysis task or for VLAN in a task.
•
Source Host List provides you with a list of the TopN source hosts measured by volume of traffic
observed on all VLANs in the selected traffic analysis task or for a VLAN in a task for the selected
time range. This list includes the source host IP address, total volume of traffic for the associated
source, and the percentage of all observed traffic generated by the source.
•
Destination Host List provides you with a list of the TopN destination hosts measured by volume of
traffic observed on all VLANs in the selected traffic analysis task or for a VLAN in a task for the
selected time range. This list includes the destination IP address, total volume of traffic for the
associated destination, and the percentage of all observed traffic generated by the destination.
The host query icon
next to the Source Host IP Address and Destination Host IP Address is a link for
initiating a host query and a link to the results of the query.
Figure 73 Protocol Report: TopN Protocol Usage List for an Individual Protocol
Application category reports
Application category reports provide rate and percentage distribution of traffic by application category
for all VLANs configured in a VLAN traffic analysis task or for an individual VLAN in a task. Click the
Application tab to display the application reports by default. Select Application Category from the Query
Type list to switch to the application category reports.
The application category reports contain the following fields:
•
Query Application Categories—Set the time range for the application category reports.
•
Application Category List—Provides a list of the application categories observed for all VLANs in
the selected traffic analysis task or for a selected VLAN in a task.