H3C Technologies H3C Intelligent Management Center - Manual (Page 212)

202
For more information about accessing and viewing application traffic analysis reports, see " Viewing
application traffic analysis reports ."
Modifying an application traffic analysis task
1. Select Service > Traffic Analysis and Audit > Settings.
2. In the Settings area of the Traffic Analysis and Audit page, click the Traffic Analysis Task
Management link.
NTA displays all tasks in the Traffic Analysis Task List in the main pane of the Task Management
page.
3. Click the Modify icon for the task you want to modify.
The Modify Traffic Analysis Task page appears.
4. In the Task Name field, modify the name for this task.
The task name must be unique.
5. In the Task Description field, modify the description for this task.
6. From the Server list, select a new NTA, NetStream, NetFlow, or sFlow collection server.
Unless otherwise configured by the administrator, the NTA server name is the IP address of the
NTA server. If the NTA server is deployed on the same server as the IMC Platform, the IP address
is the loopback address of the IMC server.
7. To add new operator groups that have access to the analysis and reports provided by this
application task, click the Select button next to the Reader field.
The Operator Group List dialog box appears.
a. From the Operator Group List, select the check box next to the operator group Name for every
operator group to which you want to grant access. To select all operator groups, select the
check box in the upper left corner of the column label field for all boxes.
b. Click OK to accept your operator group selection.
The operator groups you selected are displayed in the Reader field.
c. In the Reader field, highlight the groups you want to remove to revoke operator group access
to the results of this traffic analysis task.
d. Click Delete.
e. Click OK to confirm the deletion of the selected operator groups from the task.
The Reader list is updated to reflect the deleted operator group changes.
8. From the Baseline Analysis list, select Enable to enable the Baseline Analysis feature for the reports
generated by this task; otherwise, select Disable to disable the Baseline Analysis feature.
If you selected Enable from this list, the baseline analysis trendline is displayed on graphs that
support this feature approximately seven days after the creation of the task. Initially the baseline
trendline displays statistics based on the first week's collection and is adjusted over time as more
data is collected.
If the Baseline Analysis list does not appear, it is because the Baseline Analysis feature is disabled
in the NTA parameters. For more information on configuration options for the NTA parameters,
including the Baseline Analysis feature, see " Configuring NTA traffic analysis parameters ."
9. To add more applications to the task, click the Add button next to the Application List field.
However, you must have at least one application and no more than 50 applications configured for
each task.