H3C Technologies H3C Intelligent Management Center - Manual (Page 275)

265
The inbound report also includes TopN Traffic List for Session Host, which provides a list of TopN session
hosts measured by volume and percentage of traffic generated by the TopN source/destination pairs
with destination hosts configured in the selected task.
The outbound report also includes the TopN Traffic Report for Session Host pie chart. The pie chart
displays the distribution of traffic generated by the TopN source/destination pairs with source hosts
configured in the selected task. The outbound report includes TopN Traffic List for Session Host, which
provides a list of TopN session hosts measured by volume and percentage of traffic generated by the
TopN source/destination pairs with source hosts configured in the selected task.
These lists also contain a link to reports for the selected session host. The host query icon next to the
Source Host IP address is a link for initiating a host query and a link to the results of the host query. NTA
also provides a query option for filtering reports based on criteria you define.
To view the reports for a host traffic analysis task, click the Session tab to view traffic reports for the
selected host traffic analysis task.
Query sessions
NTA enables you to change the filter criteria for session reports. You can change the default settings for
source or destination session pair information, or time range to customize the charts and lists displayed
under the Session tab.
1. In the query criteria area in the upper right corner of the session report, click the query criteria icon
. On the list that appears, select Last 1 hour, Last 3 hours, Last 12 hours, Last 24 hours, Last 7
days, Last 30 days, Last 3 months, or Custom. Click the Query icon in the query criteria area
to set the time range for the source report.
2. To customize the time range for the source report, select Custom from the list that appears in the
query criteria area, or click the Advanced icon
to the right of the query criteria field to expand
the query criteria setting area.
3. Enter or select one or more of the following query criteria:
• Source Host—In the Source Host field, enter the IP address or address range. To enter the IP
address for a single host, enter the IP address using dotted decimal notation.
An example of a valid IP address entry:
10.153.89.10
An example of a valid network/subnet mask in dotted decimal notation:
10.153.89.0/255.255.255.0
A valid network/subnet mask entry using CIDR notation:
10.153.89.0/24
An example of a valid IPv6 address entry:
a001:410:0:1::1
A valid IPv6 address and subnet mask using CIDR notation:
a001:410:0:1::1/64
• Destination Host—Enter the IP address or address range in the Destination Host field. To enter
the IP address for a single host, enter the IP address using dotted decimal notation.
• Start Time—Enter the start time of the time range, in the format of YYYY-MM-DD hh:mm. Or,
click the Calendar icon to the right of the input box to manually specify a start time.