H3C Technologies H3C Intelligent Management Center - Manual (Page 295)

285
Query applications
NTA enables you to change the filter criteria for application reports. You can change the default settings
for query type, application, direction, or time range for the graphs and tables to customize the reports
displayed under the Application tab.
1. Click the query criteria icon in the upper right corner of Application Report, and select Custom
from the list that appears. Or, click the Advanced icon to the right of the Query Criteria to
expand the query criteria setting area.
2. Select Application from the Query Type list. The page will display the report for Layer 4 through
Layer 7 applications.
3. Enter or select the other query criteria:
• Application—To select the application you want to search for, click the Select button next to
the Application field. Click the Clear button to clear all selected applications. The Query
Applications dialog box displays an empty Application List in the lower portion of the dialog
box.
To select the applications you want to search for, you must first query the Application List as
follows:
a. In the Query Applications area of the dialog box, enter or select one or more of the following
search criteria:
• Application—In the Application field, enter a partial or complete name for the
applications for which you want to search.
• Pre-defined—From the Pre-defined list, select Yes to search for applications that are
predefined; from the list, select No, to filter for applications that are user-defined; select
Not limited to include system or predefined and user-defined applications.
b. To display the full Application List, click Query without entering any search criteria.
c. Click Query to begin your search.
The results of your query are displayed in the Application List below the Query Applications
area.
d. Select the check boxes next to the applications for which you want to search.
e. Click OK to add the applications to the filter.
The applications you selected appear in the Application field.
• Start Time—Enter the start time of the time range, in the format of YYYY-MM-DD hh:mm. Or,
click the Calendar icon to the right of the input box to manually specify a start time.
• End Time—Enter the end time of the time range, in the format of YYYY-MM-DD hh:mm. Or,
click the Calendar icon to the right of the input box to manually specify an end time.
Additionally, to set the start time and end time for the application report, you can click the query
criteria icon
in the upper right corner of the application report. On the list that appears, select
Last 1 hour, Last 3 hours, Last 12 hours, Last 24 hours, Last 7 days, Last 30 days, Last 3 months,
or Custom. Click the Query icon
in the query criteria area to set the time range for the traffic
report for Layer 4 through Layer 7 applications.
4. Click OK.
The page will update to display the results of your query.