Viewing vpn traffic analysis task details, Adding a vpn traffic analysis task – H3C Technologies H3C Intelligent Management Center User Manual
Page 282
272
Viewing VPN traffic analysis task details
1.
Select Service > Traffic Analysis and Audit > Settings.
2.
In the settings area of the Traffic Analysis and Audit page, click the Traffic Analysis Task
Management link.
NTA displays all tasks in the Traffic Analysis Task List in the main pane of the Task Management
page.
3.
In the Task Name field of the Traffic Analysis Task List, click the contents of the VPN Task Type to
view the details for an individual task.
Traffic Analysis Task Details page
•
Task Name—Contains the name of the task.
•
Task Description—Contains the description for the associated task.
•
Server—Contains the server name or IP address of the NTA server.
•
Task Type—Identifies the task type, which can be interface, VLAN, probe, application, host,
VPN, or inter-business.
•
Reader—Identifies the operator groups in IMC that have been granted access to view the
reports generated by this traffic analysis task.
•
Baseline Analysis—Indicates whether the Baseline Analysis feature is enabled for the task. If
the Enable Baseline Analysis field is not displayed, it is because the Baseline Analysis feature
is disabled on the NTA server. For more information on configuration options for the NTA
server, including the Baseline Analysis feature, see "
Configuring NTA traffic analysis
•
VPN Instance List—Identifies the VPNs and their IP addresses, VPN IDs, and descriptions
configured for this traffic analysis task.
4.
Click Back to return to the Traffic Analysis Task List.
Adding a VPN traffic analysis task
1.
Select Service > Traffic Analysis and Audit > Settings.
2.
In the settings area of the Traffic Analysis and Audit page, click the Traffic Analysis Task
Management link.
NTA displays all tasks in the Traffic Analysis Task List in the main pane of the Task Management
page.
3.
Click Add.
The Add Traffic Analysis Task page is displayed.
4.
To add a VPN traffic analysis task, select the option next to VPN in the Select Task Type area.
5.
Click Next.
The Add Traffic Analysis Task page is refreshed.
6.
In the Task Name field, enter a name for this task.
The task name must be unique.