Freescale Semiconductor MPC5200B - Manual (Page 263)

MPC5200B Users Guide, Rev. 1
8-30 Freescale Semiconductor
Address Bus Mapping
8.8 Address Bus Mapping
Figure 8-4. Address Bus Mapping (32-Bit External Data Width)
The Memory Controller extracts the Column Address from the XL bus address. The Column Address is presented on the
MPC5200B MEM_MA[12:0] pins during SDRAM Read and Write commands.
Column Address bits 12:8 depend on the Control register hi_addr bits. Auto Precharge (MEM_MA[10])is always inhibited
(0).
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Internal XL address bus
Ext MEM_MA pins, row
External MEM_MA pins, column
Internal XL address bus
XL bus address bits 29:31
control the data mask pins,
MEM_DQM[3:0].
This is an illustration of how the XL bus address enters the Memory Controller and is broken down into Row, Column, and
Bank Address fields. Shown below is the 32-bit XL bus address. The Memory Controller uses bits 4:31.
Can be used as most significant row or column address bits:
{CA12, CA11, CA9, CA8} or {CA11, CA9, CA8, RA12}
The Memory Controller extracts the Row Address from the XL bus address.
The Row Address is presented on the MPC5200B MEM_MA[12:0] pins dur-
ing SDRAM Active commands.
Row Address bit 12 depends on the Control register hi_addr bit.
12 11 10 9 8 7 6 5 4 3 2 1 0
0 8 9 10 11 12 13 14 15 16 17 18 19
12 11 10 9 8 7 6 5 4 3 2 1 0
5 0 6 7 22 23 24 25 26 27 28 29
Internal XL address bus
Ext MEM_MA pins, row 12 11 10 9 8 7 6 5 4 3 2 1 0
7 8 9 10 11 12 13 14 15 16 17 18 19
hi_addr = 0
hi_addr = 1
4
hi_addr = 0
11
External MEM_MA pins, column
Internal XL address bus
12 11 10 9 8 7 6 5 4 3 2 1 0
4 0 5 6 22 23 24 25 26 27 28 29 0
hi_addr = 1
11
8
hi_addr = 1
17
XL bus address bits 20:21 select the internal bank of an SDRAM device. Each SDRAM
device has 4 internal banks.
XL bus address bits 20:21 are presented on the MPC5200B MEM_BA[1:0] pins during
SDRAM Active, Read, and Write commands.