Toa N-8000 Series - Manual (Page 119)

2-8
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
2. CONVERSATION FUNCTIONS AND OPERATION
2.1. Calling
2.1.1. Individual calls
• The desired party can be called by pressing its station number with or without lifting the handset.
• Conversation can start when the called party answers and the call tone stops.
• A busy tone indicates that the called party is already engaged on another line.
Connection to the called party will be made as soon as the busy line is freed.
2.1.2. Redialing
Pressing the Redial key automatically redials the last dialed number.
Only the N-8000MS Multifunctional Master Station and the N-8500MS/8600MS IP Multifunctional Master
Station permit selection from the most recent 10 numbers dialed.
Tip
Keys to be registered into the Redial key are the Dial keys (12 keys), the Paging key, and the Function key.
When using the N-8010MS/8011MS/8020MS/8031MS/8033MS/8410MS/8510MS:
Press the Redial key to automatically redial the last dialed
number (individual call, paging, etc.)
Paging
[Example when dialing the paging last]
R e d i a l i n g
0 : 1 0 0 1
R e d i a l i n g
7 : 1 2 0 3
1 2 0 3 T O A
C a l l i n g
[Example]
When using the N-8000MS/8500MS/8600MS station:
Step 1. Press the Redial key to display the most recently
dialed numbers on the display.
Step 2. Use the Up and Down arrow keys to display the
desired dial number. Pressing the Down arrow key
displays the last ten numbers dialed in reverse
chronological order. They are numbered 0 − 9 from
top to bottom.
Step 3. Press either the Select or Redial key to perform the
dial operation indicated on the display (individual
call, paging, etc.).