Toa N-8000 Series - Manual (Page 627)

8-27
Chapter 8 APPENDIX
5.14. N-8610RM IP Microphone Station
CD (for PC setting, maintenance use) ....... 1
Ferrite clamp (black) ................................... 2
Ferrite clamp (white) ................................... 1
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Remote microphone extension: RM-210
Wall mounting bracket: WB-RM200
AC adapter: AD-1210P or AD-1215P
• Optional products
Power Source Power supply device that complies with IEEE802.3af standard or
12 V DC (use of the optional AC adapter)
Power Consumption Use of the AC adapter (12 V DC): 4 W (microphone only)
8.5 W (when connecting 4 RM-210,
Extension units)
Use of the PoE (48 V DC): 5.2 W (microphone only),
7.5 W (when connecting 4 RM-210, Extension
units)
Speech Method Hands-free conversation (use of goose-neck microphone)
Audio Frequency Range 300 Hz – 7 kHz
Microphone Unidirectional electret condenser microphone
Built-in Speaker 6.6 cm cone-type, rated output 0.3 W, 8 Ω
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio Packet
Transmission System
Unicast, Multicast
Number of Paging
Destinations
Unicast (max. 16), Multicast (max. 191)
Connector RJ-45 connector (PoE compatible)
Voice Sampling Frequency 16 kHz, 8 kHz (controllable on the software)
Quantifying Bit Number 16-bit
Voice Encoding Method Sub-band ADPCM, Cryptosystem
Voice Packet Loss Recovery Silence insertion
Audio Delay Time 80 ms, 320 ms (controllable on the software)
No. of Connectable Expansion Max. 4 units (maximum 2 units at PoE power supply)
Operation Function keys (including a covered key), talk key
Indicator Power indicator, Status indicator, Selection indicator,
Broadcast status indicator, Microphone indicator
Installation Method Desk/Surface mounted master station
(When mounting to the wall, use the optional WB-RM200.)
Operating Temperature 0 to 40 °C
Operating Humidity 90 % RH or less (no condensation)
Finish ABS resin, blueish gray
Dimensions 190 (w) x 76.5 (h) x 215 (d) mm (excluding microphone)
Weight 700 g