Toa N-8000 Series - Manual (Page 317)

3-13
Chapter 3 INSTALLATION & WIRING
4.3. Wall Mounting
Step 1. Install the optional YC-850 Wall mounting bracket to the N-8000DI.
Step 2. Mount the N-8000DI on the wall.
Notes
• Use appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the YC-850.
• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be
easily accessible.
Cord clamp
Power supply cord
Protect against disconnection
(Power supply plug)
Unlock cord clamp and run the
power supply cord through it.
Note
Keep the cable length between a
power supply plug and cord clamp
as short as possible.
Wood screw 3.5 x 20
(supplied with the YC-850)
Wall surface
YC-850 Wall mounting bracket
Machine screw M3 x 6
(supplied with the YC-850)
N-8000DI