Toa N-8000 Series - Manual (Page 151)

2-40
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
Step 4. Press the [ ] key.
Confirmation tone sounds, then a chime tone is transmitted to the selected zone(s).
The control output(s) assigned to the selected control output pattern are activated.
Step 5. Page with the handset either lifted or in place.
Step 6. Either press the Clear key or replace the handset.
A chime tone is transmitted to the selected zone(s), then paging is completed.
On termination of broadcast, the control output having been activated in synchronization with the
broadcast is also terminated.
Note
Set the SX-2000 system ID using the supplied N-8000 Setting Software. (Refer to p. 5-28 .)