Toa N-8000 Series - Manual (Page 216)

2-105
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
Step 3. Speak into the microphone while holding down the Talk key when the microphone indicator of the Talk
key begins to light green.
Tip
When a part of the zones being broadcast to is assigned to the N-8000 zone selection key other than
the key pressed in Step 1, the status indicator of so assigned zone selection key flashes green.
Note
In the example shown at right, the status
indicator of the uppermost Paging zone
pattern key flashes green as a part (Zone
1) of the set zone group (Zone pattern 01) is
placed in broadcast mode.
Step 4. Release the Talk key. (Paging call end)
Green Orange
Orange Green
Broadcast status indicator
Microphone indicator
Talk key
Flashes green.
N-8000 zone selection key (Zone 1)
N-8000 zone selection key
(Zone pattern 01*)
N-8000 zone selection key
(Zone 23 and Zone pattern 02*)
* Zone pattern 01: Zones 1, 2, and 3
Zone pattern 02: Zones 4 and 5
Zone 1
Amplifier
Speaker
No. 1000 No. 1002 No. 1003 No. 1004
Zone 23
Talk key
6.1.2. Using dial keys
When dial keys are assigned to the Function keys, paging calls can be made with the same dial operation ( p.
2-26 ) as that of the Master station's selectable paging.
6.2. Responding to Paging
If the paged party performs a response operation at the nearest station, it can call and begin conversations
with the paging party. Paging response operation can be performed with the Paging response key in the same
manner as the master station.
For operation details, read "Responding to Paging" at the master station. (Refer to p. 2-31 .)