Toa N-8000 Series - Manual (Page 323)

3-19
Chapter 3 INSTALLATION & WIRING
7.2. Wall hanging
7.2.1. N-8000MS/8010MS/8020MS/8410MS/8500MS/8510MS/8600MS
The station can be mounted on a wall using an optional YC-280 Wall-mounting bracket.
The YC-280 can be installed to a one-gang electrical box.
[Mounting example]
Step 1. Install the YC-280 wall mounting bracket to the wall.
Notes
• Use the appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the YC-280.
• No fitting screws for electrical box are supplied with.
Use commercially available screws.
Step 2. Hang the station on the wall mounting bracket hook to install.
Push down the station main body in the direction indicated by the arrow.
YC-280 Wall mounting bracket
Station
Wall
surface
Wood screw 3.5 x 20
(supplied with the YC-280)
Hook
1
2
The figure shows the N-8000MS.