Toa N-8000 Series - Manual (Page 546)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
5-136
8.4.1. Test-listening to a siren tone
1 2
Step 1. Select the desired siren tone from the pull-down menu.
Step 2. Press the Test-listen button.
The selected siren tone plays and automatically stops upon reaching its end.
The test siren tone is played back on the PC together with the announcement "This is a sample."
8.4.2. Transferring a siren tone to the Ip Master station and Ip Remote microphone station
1 2
Step 1. Select the desired siren tone from the pull-down menu.
Step 2. Press the Change button.
The changed siren tone is transmitted to all IP Master stations and IP Remote microphone stations
within the system.
8.4.3. Test-listening to messages
Step 1. Select the message to listen to from the message list.
Step 2. Press the Test message button.
The selected message is played, and automatically stops at
its end.
1
2