Toa N-8000 Series - Manual (Page 554)

6-7
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
[Operation buttons]
(1) Refresh
Updates status data for speech path, line, and call-in*.
* Call-in status refers to one station being called by others when the N-8000 system's call response mode
is set to "Selective Response."
(2) line No. and Terminal No. buttons
Used to display line numbers or station numbers for each station.
[link status]
Displays the exchange’s current link status. Pressing the Update button updates this data.
(1) link No.
Speech path numbers.
(2) Calling Station
Displays the number of the calling station.
(3) Called Station
Displays the number of the called station.
(4) Station on hold
Displays the number of the station on hold.
(5) Status
Displays the operating status of the speech path.
[Call-in status]
Displays the Call-in status currently being received by the exchange.
(1) Terminal No.
Displays the connected station number.
(2) Call-in (Only when the system is set to "Selective Response" mode)
Displays all the station numbers making calls to each station connected to the exchange.
Emergency calls are displayed in red.
Note
The call-in status is not displayed in systems set for sequential-answer priority.