Toa N-8000 Series - Manual (Page 307)

3-3
Chapter 3 INSTALLATION & WIRING
1.1.3. N-8000ex/8010ex mounting
1.2. Desk-Top Installation
When installing the N-8000EX/8010EX on a desk, secure the supplied plastic feet to the bottom surface of the
N-8000EX/8010EX using the supplied machine screws.
N-8000EX/8010EX
Rack mounting screw 5 x 12 with plain washer
(supplied with the N-8000EX/8010EX)
Rack mounting bracket
(supplied with the N-8000EX/8010EX) Tapping screw 3 x 8
(supplied with the N-8000EX/8010EX)
1
2
N-8000EX/8010EX
Plastic foot
(supplied with the N-8000EX/8010EX)
Machine screw M4 x 20
(supplied with the N-8000EX/8010EX)
Step 1. Install the rack-mounting bracket to the
N-8000EX/8010EX.
Step 2. Mount the N-8000EX/8010EX on the Equipment
rack.