Toa N-8000 Series - Manual (Page 580)

6-33
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
[Operation buttons]
(1) log Save button
Saves operation logs to a PC.
(2) latest button
Updates operation logs.
(3) prev. page button
Returns the display to the previous page.
(4) Next page button
Advances the display to the next page.
(5) Number Indication button
Switches the station display in the line column between "station number" and "line number." The display
alternates between station and line numbers whenever this button is pressed.
(6) Detail Indication button
Adds any relevant error logs to the operation log display. The display alternates between operation logs and
operation logs containing error logs each time this button is pressed.
[log items]
(1) Time
Indicates the time that the event occurred.
(2) Category
Indicates the type of log.
Exchange Processing: Line control data
System: System data
Remote: Control from PC
(3) Contents
Indicates event contents. Errors are indicated in red.
(4) line 1, line 2 and line 3
Indicates the line on which an event occurred. Station and IP address numbers are displayed.
Note
If the indication "Firmware failed. Please contact our sales office." is displayed, the system is suffering a
problem and could fail. In such cases, please contact TOA immediately.