Toa N-8000 Series - Manual (Page 299)

2-188
Chapter 2 FUNCTIONS AND OPERATION
OTHER FUNCTIONS (CONVENIENT FUNCTIONS)
14. DIRECT SELECT
(only when the N-8000DI is used)
This function can be used when the system's call response mode is set to "Selective Response." By separately
making an operation panel for a specified Master Station which is equipped with the lamps and buttons
corresponding to other stations, and by assigning the Master Station and other stations to the N-8000DI's
contact input and output channels, the stations that are calling the specified Master Station are indicated by
means of lamps. Also, operating the desired channel button allows calls to be made between the Master Station
and the station assigned to that channel.
N-8000DI
Specially-made operation panel
(with lamps and buttons)
Calling
Calling
No. 201
No. 202
No. 203
LAN
405
106
306
406
101
201
301
401
102
202
302
402
103
203
303
403
104
204
304
404
105
205
305
206
•
•
The lamp for Station No. 201 flashes if the
Master Station is called by Station No. 201.
Pressing the button for Station No. 201
allows conversations with No. 201 to start.
The channel status indicators on the N-8000DI correspond to the contact output operations as listed below.
Operation of station
under control
Channel status indicator
on the N-8000DI
Emergency call-in* 1
* 1 When a call from the station set for emergency call or priority 5 is received
* 2 When a call other than "Emergency call-in" is received
Other call-in* 2
Calling
Call waiting
Conversation mode
Holding
Being paged
Scan monitoring
Flashing rapidly
Flashing slowly
Lit
Lit
Lit
Lit
Unlit
Lit
Closed
Closed
Closed
Closed
Closed
Closed
Open
Closed
N-8000DI's contact
output status