Toa N-8000 Series - Manual (Page 221)

2-110
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
7.2. General-Purpose Broadcast
General broadcast patterns* having been set in the SX-2000 system can be activated.
* Contain the preset broadcast sound sources, output zones, and other settings. For details, refer to the SX-
2000 Setting Software Instructions.
In the N-8000 system, you can import the SX-2000 system setting and use it as a control pattern using the
N-8000 Setting Software. (Refer to p. 5-77 .)
Note
The SX-2000 system's general broadcast pattern that can be activated by the N-8000 system's station is only
the one set as "General broadcast (Level)" assigned to each unit's control input in the Event setting.
7.2.1. Using the General broadcast pattern key
Step 1. Press the General broadcast pattern key
A set general broadcast pattern is selected and
activated.
The selection indicator of the General broadcast
pattern key lights green.
Step 2. Press the General broadcast pattern key again.
The General broadcast pattern stops by pressing the
currently selected Function key again.
The selection indicator of the General broadcast
pattern key goes out.
7.2.2. Using the General broadcast pattern key
When the dial key is assigned to each key, general broadcast pattern can be activated with the same dial
operation ( p. 2-34 ) as that of the N-8600MS's general broadcast patter start.
General broadcast
pattern key
Green
General broadcast
pattern key
Selection indicator