System clock settings, P. 5-128, 6 – Toa N-8000 Series User Manual
Page 538
Chapter 5
SYSTEM SETTINGS BY SOFTWARE
5-128
7. SYSTEM ClOCk SETTINGS
The N-8000 Setting Software program allows the clocks for all exchanges, various kinds of interface units, and
IP stations connected to the system to be set. To set exchange clocks individually (for example, if there is a time
difference between exchanges), use either the browser (refer to
), the N-8000MS Multifunctional Master
station, or the N-8500MS/8600MS IP Multifunctional Master station (refer to
).
• Synchronize the system clock with the PC clock through the following procedure. Make sure that the PC clock
has been set with the correct time beforehand.
Step 1. Click "Clock Settings" on the initial screen.
A clock-setting dialog is displayed, showing the PC's current time.
Step 2. Performs system clock settings.
Press "OK" to synchronize the clocks for all exchanges connected to the network with the PC clock.