P. 5-84 – Toa N-8000 Series User Manual
Page 494
Advertising
Chapter 5
SYSTEM SETTINGS BY SOFTWARE
Station: Scan Monitor
5-84
5.8.3. Scan monitor settings
Step 1. Click "Scan monitor" tab to display the following setting screen.
Step 2. Set the scan monitor sequencing time in 1-second units from 1 to 10 seconds.
Step 3. Set the operation of monitor alert.
None:
The display remains the same as in standby mode even during monitoring.
Display:
The status indicator continuously lights during monitoring.
Display and Tone: A start tone sounds when monitoring begins, and the status indicator remains lit
during monitoring.
Step 4. Set the group of stations to be monitored.
Input the number of station to be monitored in the order of monitoring.
Advertising