Toa N-8000 Series User Manual
Page 60
1-43
Chapter 1
GENERAL DESCRIPTION
[Rear]
[Bottom]
LAN
IP REMOTE MICROPHONE STATION
DC INPUT
12V 400mA
16
15
17
15. AC adapter terminal [DC INPuT]
Connect the AC adapter*
1
to this terminal.
*
1
Use the AD-1210P/1215P (optional) or its
equivalent.
16. Network connection terminal [LAN]
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Connecting the station to a PoE (Power over
Ethernet) switching hub eliminates the need for
an AC adapter.
(Ethernet RJ-45 jack)
17. MAC address
This is the MAC address*
2
for the unit. Since
the relationship of each unit location to its MAC
address is established when setting the network
attributes, keep track of this relationship for later
use.
*
2
The inherent address assigned to each network
component, expressed in 12-digit hexadecimal
notation.
18. Wall bracket mounting slots
Hang the mounting bracket hooks to these slots
when using the WB-RM200 Wall Mounting
Bracket. (Refer to
.)
18