Toa N-8000 Series - Manual (Page 90)

1-73
Chapter 1 GENERAL DESCRIPTION
Description
Reference page
Setting Operation
Function
Conversation
Calls can be made to the desired station by dialing its
number.
When a station is assigned to a call group, if the station is
called, all stations within that group are simultaneously
called by a continuous call tone regardless of their call
receiving mode settings. If any one of the stations within
the group responds, calls to the other stations stop.
Individual call
Group call
p. 2-134
p. 2-134 p. 5-99
Calls to a busy station are automatically transferred to
another designated station, if group hunting function is
set to the called station.
When no response is made to a call for a set period
of time, the call is automatically transferred to another
designated station.
Calls to stations are automatically transferred to
another designated station without sounding a call tone.
Programming a station to which a call is to be rerouted
instantly sets that station to the Call forwarding mode.
Automatic
transfer
Group hunting
Absence transfer
Call forwarding
If a called station is busy, as indicated by a busy tone,
pressing the [9] key transmits a short priority call tone,
then forcibly terminates the current conversation,
allowing the call to go through. Access to priority
call operation or refusal of priority calls can be set
individually for each station.
Executive priority
By hook-flashing (momentarily depressing the hook
switch) a third party can be called to switch from a two-
party conversation to a three-party conference call,
and the third party conversation returned to the original
two-party conversation or switched to a conversation
between the original conversation partner and the
called third party.
Call transfer p. 2-135
p. 2-137
p. 2-139
p. 2-140
p. 2-142
p. 5-97
p. 5-99
p. 5-100
Calls to stations are automatically transferred to
another designated station without sounding a call
tone. Even when the station to which a call is being
rerouted is programmed, the station is not switched to
Call forwarding mode until the set time is reached.
Time-based
call forwarding
p. 2-141
7.1.5. Telephone's functions