Toa N-8000 Series - Manual (Page 49)

1-32
Chapter 1 GENERAL DESCRIPTION
6.2. IP Station
6.2.1. N-8500MS IP Multifunctional Master Station
[Top]
3
2
1
5
6
7
8
9
10
11
12
13
14
15 16 18 17
4
1. Handset
Lift the handset for handset conversation. Lifting
the handset disconnects both the hands-free
microphone and the speaker.
2. Auto-dial key
Used to call or register the party to be called. (Refer
to p. 2-11 .)
3. Auto-dial directory
Writes the auto-dial registration contents to this
directory.
4. Status indicator (red)
Flashes when a call or paging announcement is
received, continuously lights during conversation,
and is off while in standby mode. The indicator
also continuously lights while data is written to
an internal storage memory (FlashMemory), and
flashes if there is a failure.
(Refer to p. 8-14 .)
5. Speaker
Outputs call tones and used for hands-free
conversations.
6. Liquid crystal display
Displays the dialed number or the number of a
call received in 2 lines of 16 digits. Pressing the
Menu key (8) displays the menu screen.
7. Selection key [SELECT]
Used for menu item selection or input value
confirmation.
8. Menu key [MENU]
Used for auto-dial registration (refer to p. 2-11 ) or
system settings. (Refer to Chapter 7 .)
9. Redial key [REDIAL]
Permits the last called number to be dialed. (Refer
to p. 2-8 .)
10. Function key [FUNCTION]
Use this key to perform function settings such as
assigning call transfer recipients or programming
one-touch dialing.