Toa N-8000 Series - Manual (Page 381)

3-77
Chapter 3 INSTALLATION & WIRING
13.12.3. N-8600MS connection
LAN HEAD SET DC INPUT EXT SP
MIC SP 12V 200mA
1
2
3 4
5
N-8600MS rear
To network
To AC mains
To external speaker
To headset microphone
To headset speaker
1. AC adapter terminal connection
Connect the AC adapter*.
* Use the AC adapter AD-1210P/1215P (optional) or
the equivalent.
As for the usable adapter, consult your TOA
dealer.
2. external speaker terminal connection
3. headset speaker connection
ø3.5 mm mini jack.
Connect the headset speaker.
4. headset microphone connection
ø3.5 mm mini jack.
Connect the headset microphone.
5. Network connection terminal connection
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Connecting the station to a PoE (Power over
Ethernet) switching hub compliant with IEEE802.3af
eliminates the need for an AC adapter. (For
connection, refer to the instruction manual supplied
with the switching hub.)
Use a straight through cable of UTP category 5 or
more for this connection.
11 mm
Press down the desired push-
in terminal button with a tip of
standard driver, and insert the
cable securely.
For the type of cables, refer
to p. 3-73 , Type of Cable.
INT.
SP
EXT.
SP
Note
When using the external speaker,
set the internal/external speaker
switch on the bottom to the EXT.
SP position.
For the type of cables, refer
to p. 3-81 , Type of Cables.