Toa N-8000 Series - Manual (Page 41)

1-24
Chapter 1 GENERAL DESCRIPTION
2
3
4
9
10
5
7
8
11
1 6
1. Paging response key [RESP.]
Responds to a paging. (Refer to p. 2-31 .)
2. Paging key [CALL]
Makes a paging. (Refer to p. 2-25 .)
3. Hold key [HOLD]
Places the conversation on hold.
(Refer to p. 2-14 .)
4. Status indicator (red)
Flashes when a call is received, continuously lights
during a conversation, and is off while in standby
mode. The indicator also continuously lights while
receiving a paging announcement.
5. Speaker
Outputs call tones and used for hands-free
conversations.
6. Function key [FuNCTION]
Use this key to perform function settings such as
assigning call transfer recipients or programming
one-touch dialing.
7. Redial key [REDIAL]
Permits the last called number to be dialed. (Refer
to p. 2-8 .)
8. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to p. 2-15 .)
9. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to p. 2-9 .) Also, pressing this
key during a hands-free conversation establishes
a one-way conversation from the party who
pressed the key. (Refer to p. 2-7 .)
10. Dial keys
Use these keys to make a call or set a function.
11. Clear key [C]
Terminates the conversation.
6.1.5. N-8011MS Standard Hands-free Master Station
[Top]