P. 5-71 – Toa N-8000 Series User Manual
Page 481
Advertising
![background image](/manuals/714265/481/background.png)
Chapter 5
SYSTEM SETTINGS BY SOFTWARE
IP Station: Message Paging
5-71
Step 8. Perform settings for [Contact sync control].
Set the Multi Interface unit's, Direct Select unit's, or Audio Interface unit's unit number and the contact
output number that is closed in synchronization with the start of the message paging.
Make during activation: The contact is closed when the message paging is started, and opens when
the broadcast ends.
One-shot make:
The contact is closed when the message paging is started, and automatically
opens after the time set in One-Shot Make duration settings elapses.
Advertising