P. 5-125 – Toa N-8000 Series User Manual
Page 535
Chapter 5
SYSTEM SETTINGS BY SOFTWARE
Group: Remote Response Group
5-125
5.15.2. Remote response group settings
Setting the remote response station group permits any station programmed for this function to respond to calls
to other stations within the group.
Up to 16 stations can be preset.
Also, this function is only possible when the system is set to sequential response mode.
Note
Stations connected to the N-8010EX cannot be assigned to the Remote Response Group.
[Creating new remote response group]
Step 1. Click "Remote response group" tab to display the following screen.
Step 2. Choose the stations to be configured into the group from the list.
Pressing the right arrow button for the device to be set displays the group buttons for individual stations.
Stations can be selected for inclusion by clicking the button. When a selected station has already been
included in the group, its corresponding button is displayed in orange.
Notes
• Up to 16 stations can be programmed per group.
• A single station cannot be assigned to more than one group.