Toa N-8000 Series - Manual (Page 614)

8-14
Chapter 8 APPENDIX
Status Indicator Equipment Condition Action to Take
OFF Normal operation or power
OFF
–
Rapid flashing*
(in a cycle of 200 ms)
Failure of fan Contact your nearest TOA dealer.
Flashes three times in a row (in a
cycle of 200 ms) at one-second
intervals.
Failure Contact your nearest TOA dealer.
Lights for a few seconds repeatedly
at certain intervals.
Accessing flash memory
(normal operation).
Never turn off the power or press
the Reset key until the indicator
extinguishes completely.
Remains lit (for long hours). Failure Contact your nearest TOA dealer.
Flashes slowly (in a cycle of 4 s) Operation in progress in a
mode not usually used.
Press the Reset key to return to normal
operation mode.
Status indicator
Status indicator
Status indicator
Status indicator
N-8540DS
N-8500MS/8600MS N-8510MS N-8610RM
N-8640DS
N-8650DS
4. INDICATOR STATUS & TROUBLESHOOTINg
Status indicator
Exchange and various kinds of interface units
front panel
* Applicable to the N-8000EX/8010EX/8000RS/8010RS/8400RS only
The following table shows the Status indicator mode, its
corresponding equipment condition or symptom, and any
measures to be taken in the event of system failure.
[Exchange and various kinds of interface units]
Station status can be confirmed by checking the status indicator while the station is in normal standby mode.
Take appropriate measures according to the equipment condition referring to the table below.
[IP station]
Status Indicator Equipment Condition Action to Take
OFF Normal operation or power
OFF
–
Flashes three times in a row (in a
cycle of 200 ms) at one-second
intervals.
Failure Contact your nearest TOA dealer.
Lights for a few seconds repeatedly
at certain intervals.
Accessing flash memory
(normal operation).
Never turn off the power nor restart the
station until the indicator extinguishes
completely.
Flashes slowly (in a cycle of 4 s) Operation in progress in a
mode not usually used.
Restart the station to return to normal
operation mode.