P. 2-96 – Toa N-8000 Series User Manual
Page 207
2-96
Chapter 2
FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
4.2. Receiving a Call (when the system is set to "Sequential Response" mode)
Step 1. Answer a received call.
1-1. When the called station's incoming call mode is set to
"Automatic Connection Mode*," the call tone sounds
only once, after which the calling party's voice is heard
immediately through the internal speaker. Answer by
speaking into the microphone.
1-2. When the called station's incoming call mode is set to
"Continuous call tone mode*," the call tone keeps on
sounding.
Speak into the microphone after pressing the PTT key.
If a station call key is assigned a calling station number,
the key's status indicator flashes.
Press the PTT key or the station call key of which status
indicator is flashing, then speak into the microphone.
Step 2. To finish conversations, press the Talk key.
* Use the supplied N-8000 Setting Software to perform Incoming call mode setting. (Refer to
Status indicator
Station call key
Flashes
orange
PTT key
or
Talk key