Toa N-8000 Series - Manual (Page 553)

6-6
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
5. OpERaTION STaTUS DISplaY
Click Operation Status on the menu on the left side of the screen.
5.1. N-8000EX/8010EX
The screen below is an example for the N-8000EX.
(6) Save button
Write set data into the settings file in the equipment.
Notes
• The status indicator located on the equipment remains lit during the write process. Do not switch off or
restart the power or remove the LAN cable while the light is on.
• Changed network settings are not immediately updated, and the new settings take effect only after the
exchange, interface unit or IP station has been restarted. Restart the exchange, interface unit or IP station
by pressing the restart button that appears at the upper right of the screen whenever settings have been
changed.
Only when the system is set to
"Selective Response" mode