Station speaker volume, Speech method, P. 2-98 – Toa N-8000 Series User Manual

Page 209

Advertising
background image

2-98

Chapter 2

FUNCTIONS AND OPERATION

REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION

4.4. Station Speaker Volume

The station speaker volume can be preset using the supplied N-8000 Setting Software, however it can also be

adjusted at the station.

The speaker volume level can be changed in 5 steps (in 3 dB per step).

• Pressing the [Volume +] key during conversation increases the volume.

• Pressing the [Volume –] key during conversation decreases the volume.

4.5. Speech Method

4.5.1. Hands-free conversation

Permits conversations to be made without using the handset when a call is made

without lifting a handset or received in automatic connection mode.

[Operation when both stations are engaged in hands-free conversation]

When both stations (except the N-8410MS) are engaged in hands-free conversation, either full duplex

conversation by way of an echo canceller* or half duplex conversation by way of a voice switch is made

depending on conditions. (Refer to

p. 8-2, "FULL DUPLEX AND HALF DUPLEX CONVERSATIONS."

)

During this conversation, station's internal settings (parameters relating to the condition of sound reflection)

are constantly updated in response to the change in sound collected by the built-in microphone, allowing for

optimum hands-free conversation.

When both stations make hands-free conversation after either one has been moved in a new environment or

the environment surrounding the station has significantly changed, this may cause acoustic feedback. In this

case, continue the conversation and the situation will soon return to the normal condition.

If acoustic feedback cannot be removed, adjust the microphone sensitivity and speaker output volume of the

station.

Note

Use the supplied N-8000 Setting Software (refer to

p. 5-65

) to set the microphone sensitivity and speaker

output volume.

* An echo canceller is used to eliminate acoustic feedback caused when the voice outputs from the station's

speaker are picked up by the same station's microphone. As acoustic feedback cannot be eliminated

thoroughly, the echo canceller is usually used in conjunction with a voice switch.

Selection indicator

[Volume +] key

Green

Selection indicator

[Volume –] key

Green

Advertising