Toa N-8000 Series - Manual (Page 132)

2-21
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
[Calls to stations set for Time-based Call forwarding]
Step 1. When the preset transfer time is reached, the station's display shows the station (e.g. No. 62) has
entered the Time-based Call forwarding mode (N-8000MS/8500MS/8600MS only).
Step 2. Calls to stations (original station) are automatically transferred to the transfer destination station without
sounding a call tone.
6 3 : E n t r a n c e
6 2
Transfer destination
station number Transfer destination station name
Original station number
No. 61
No. 62
Original station number
Transfer destination station
6 2
Call tone
No. 63
0:00
12:00
6:00
8:00
18:00
16:00
Transfer time
zone
End time Start time
Programming or erasure can be performed at your station.
[Programming] 4 3 X X + + + (Confirmation tone)
Function designated
number
Transfer destination
station number
[Erasure]
4 3 Y Y + + + (Confirmation tone)
The originally called (your) station number
Notes
• The station to which a call is to be transferred via multi interface unit cannot be programmed as a
transfer destination station.
• The programmed contents set by dialing operation are automatically saved into the exchange or IP
stations at midnight every day. If the exchange or IP station is turned off before completion of save, the
state returns to the contents that were programmed before power-off.