Toa N-8000 Series - Manual (Page 220)

2-109
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
Step 3. Speak into the microphone while holding down the Talk key when the microphone indicator of the Talk
key begins to light green.
Tip
When a part of the zones being broadcast to is assigned to the SX-2000 zone selection key other than
the key pressed in Step 1, the status indicator of so assigned Zone pattern key flashes green.
Note
In the example shown at right, the
status indicator of the uppermost
SX-2000 zone selection key flashes
green as a part (Zone 1) of the set
zone group (Zone pattern 01) is
placed in broadcast mode.
Step 4. Release the Talk key. (Broadcast end)
The chime tone will be broadcast.
In this event, the chime tone is heard through the station's built-
in speaker.
Zone 1
Amplifier
Speaker
Zone 8
Amplifier
Speaker
Talk key
Green Orange
Orange Green
Broadcast status indicator
Microphone indicator
Talk key
Flashes green.
SX-2000 zone selection key
(Zone 1)
SX-2000 zone selection key
(Zone pattern 01*)
SX-2000 zone selection key
(Zone 8 and Zone pattern 02*)
* Zone pattern 01: Zones 1, 2, and 3
Zone pattern 02: Zones 4 and 5
7.1.2. Using dial keys
When dial keys are assigned to the Function keys, selected zone broadcast can be made with the same dial
operation ( p. 2-26 ) as that of the N-8600MS's selected zone broadcast.