Toa N-8000 Series - Manual (Page 310)

3-6
Chapter 3 INSTALLATION & WIRING
N-8000RS/8010RS/8400RS
Rack mounting screw 5 x 12 with plain washer
(supplied with the N-8000RS/8010RS/8400RS)
Rack mounting bracket
(supplied with the N-8000RS
/8010RS/8400RS)
Tapping screw 3 x 8
(supplied with the N-8000RS
/8010RS/8400RS)
1
2
2.1.3. N-8000RS/8010RS/8400RS mounting
Step 1. Install the rack-mounting bracket to the N-8000RS/8010RS/8400RS.
Step 2. Mount the N-8000RS/8010RS/8400RS on the Equipment rack.
2.2. Desk-Top Installation
When installing the N-8000RS/8010RS/8400RS on a desk, secure the supplied plastic feet to the bottom
surface of the N-8000RS/8010RS/8400RS using the supplied machine screws.
N-8000RS/8010RS/8400RS
Plastic foot
(supplied with the N-8000RS/8010RS/8400RS)
Machine screw M3 x 8
(supplied with the N-8000RS/8010RS/8400RS)